Heir V2 DIAMOND for Drop AIO By GKI

Heir V2 by Ground Kloud Innovations - New coloured version with slight improvements and enhancements

First in the UK!! 100% Authentic and direct from GKI 

Drop aio - HERE

Drop accents - HERE

Approved seller

We have made a few improvements and addition to the 1st batch of the Heir v2. We went for the no markings look to keep the lines and details clean.

The details for the improvements and additions are as follows below:

1. We put a locking notch on the deck so cap wont spin out of position.

2. We changed the AF hole in the bottom of the positive pin from a x2 1.5x4mm to a x6 1.1mm holes so it will have a smoother draw. (Can be fitted in the batch1)

3. We added a 2.5mm and 0.8mm air pins as i have received several request already. We listen to you guys, we always do. (Can be fitted in the batch1)

4. Made the topcap/chimney 2piece with oring from 3piece without oring. (Cannot be fitted in the batch1 deck)

5. Put a cutout on the clamp to easily cut the lead wires flush.

6. Switched to 316SS from 304SS.

7. New cap/chimney design.

Airflow options are as follows:
4mm bottom Positive Airflow(pre installed)
3.5mm bottom Positive Airflow (spare bag)

~ Air pins (will screw on the 3.5mm positive Airflow)
3mm Air pin
2.5mm Air pin
1.4mm Air pin
1.2mm Air pin
1.0mm Air pin
0.8mm Air pin

Color and material options for cap and chimney are as follows:
~ Stainless Steel
~ Black Stainless Steel
~ Blue Anodized Aluminum
~ Black Anodized Aluminum
~ Purple Anodized Aluminum

All decks will be 316 Stainless Steel with peek insulators.

x1 Heir v2 Diamond Series RBA
x1 4mm Bottom Positive AF (pre installed)
x1 3.5mm Bottom Positive AF
x1 3mm AF pin
x1 2.5mm AF pin
x1 1.4mm AF pin (MTL)
x1 1.2mm AF pin (MTL)
x1 1.0mm AF pin (MTL)
x1 0.8mm AF pin (MTL)
x1 Spare bag (O-rings and screws)

PLEASE NOTE THAT ALL PRODUCTS ON THIS WEBSITE ARE FOR PEOPLE WITH A GREAT UNDERSTANDING OF HOW HIGH END VAPING EQUIPMENT IS USED. WE WILL TAKE NO RESPONSIBILITY FOR ANY ACCIDENTS THAT MAY OCCUR FROM IMPROPER USE